Flange connection of valve

Flange connection of valve

flange connection

This is the most commonly used form of connection in the valve. According to the shape of the joint surface, it can be divided into the following categories:

1. Smooth: for valves with low pressure. convenient processing and comparison

2, concave and convex type: high working pressure, medium hard washer can be used

3, tenon and groove type: the gasket with large plastic deformation can be used widely in corrosive medium, and the sealing effect is better.

4. Trapezoidal groove: an oval metal ring is used as a gasket, and a valve with a working pressure of 64 kg/ cm2 or a high-temperature valve is used.

Copyright notice:The reproduced works are all marked out of the place. If this website does not indicate the place of origin and reproduced, it is for the purpose of transmitting more information, it does not mean to agree with its opinions or the authenticity of its contents. In case of any infringement of the author’s right of signature, or any other damage such as copyright, portrait right, intellectual property right, etc. which is not intentionally done by the website, it shall be corrected immediately upon receipt of the notice of the relevant right holder.