General valves are not tightly closed.

General valves are not tightly closed.

If the valve is not closed strictly, first of all, we should find out where the problem occurs, and then solve the problem according to the corresponding method. There are the following reasons why the valve is not closed strictly:

(1) impurities are stuck on the sealing surface, sundries are deposited at the bottom of the valve or cushioned between the disc and the seat;

(2) the stem thread is rusty and the valve cannot be rotated;

(3) the sealing surface of the valve is destroyed, resulting in leakage of the medium;

(4) the stem and disc are not connected well, so that the disc and seat deviation can not be closely contacted.

Copyright notice:The reproduced works are all marked out of the place. If this website does not indicate the place of origin and reproduced, it is for the purpose of transmitting more information, it does not mean to agree with its opinions or the authenticity of its contents. In case of any infringement of the author’s right of signature, or any other damage such as copyright, portrait right, intellectual property right, etc. which is not intentionally done by the website, it shall be corrected immediately upon receipt of the notice of the relevant right holder.